What Our Customers Are Saying about Us?

Mold removal, by definition, is the elimination of an external growth. This definition could have many different interpretations, and it is generally better to consult a mold inspection service than a mold removal company to determine the scope of the work needed to safely and adequately remove mold from a home or commercial building. In most cases, mold removal professionals will perform testing on the air quality in the area to determine what type of mold it is and then recommend the best mold removal option. There are some exceptions to this recommendation, and these are discussed below.

Nash Everett: Mold removal in Wycombe

The first step in mold removal involves the detection of mold contamination. If the air quality testing identifies mold, the next step involves removing all affected material and disinfecting the area. Mold spores are released into the air during mold growth, so by taking steps to prevent mold contamination, the spread of mold can be severely limited. Mold may be present in visible spots such as drywall, ceiling tiles, insulation, or textiles, but unseen mold colonies can form in dark, moist areas. In order to detect mold contamination, it is important to wear a strong pair of rubber gloves and a respirator, as well as using a power washer or high-pressure water hose to remove mold-bearing surface materials such as drywall and ceiling tiles.

Get a Price Quote cost for Wycombe, PA Mold Removal

The third step in mold removal involves contacting a mold removal company. Once mold has been detected, the mold removal company will identify the problem and then develop a remediation plan. This remediation plan will be based on the size and location of the mold problem, including potential toxic sources of exposure. For larger mold problems, like those that have resulted in the contamination of large amounts of plaster or lumber, the mold removal team will likely use special vacuum trucks to suck up the mold spores. Other techniques include cleaning with bleach, heat, or detergents, or sealing affected surfaces with plastic sheeting and duct tape.

Best Mold removal in Wycombe, Pennsylvania

Mold remediation companies commonly apply both chemical and physical removal techniques for mold removal. In cases where there is only a mildew presence, most mold specialists place a mildew extractor or similar device over the affected area, and then use a power washer to remove the mildew. If the mold presence is more severe or covers an extensive area, a mold specialist might also use powerful commercial ozone gas, or UV light, or other mold killing technologies. After treatment, most mold experts recommend removing any moisture source from the property, so that any future occurrences will be avoided.

Wycombe Mold removal Near Me

If there is only a small amount of mold remediation needed, the mold specialist may suggest treating with a mold inhibitor or fungicide. There are many mold inhibitors available, such as: Mr. Clean, itizer, Green Seal, and others. Mold inhibitors prevent mold spores from reproducing. The application of these mold inhibitors usually makes the affected area dry, which kills all the mold spores. A fungicide will make the surrounding area inhospitable to mold spores.

Affordable Nearby Mold Removal 18980

One more mold removal technique involves using bleach. A mold specialist might suggest spraying the affected areas with large amounts of commercial grade bleach, which would destroy the black mold spores. However, this bleach has a downside; it is extremely harsh and could potentially harm human health or the environment.

Mold removal can be quite difficult if the mold spores have penetrated the property’s nonporous surface, or if the mold spores have reached down into the crawl space. In most cases, mold removal is best achieved by cleaning affected areas with proper cleaners that are designed for porous surfaces, and not soil or wood surfaces. Most commercial cleaners are made for use on porous surfaces, so they will work on mold affected areas. Some of the best organic cleaners for mold removal are based on natural oils that penetrate the surface and work deep into the wood or soil. These organic cleaners are also great for keeping the property’s humidity levels in check.

Any mold remediation project should contain protective gear including gloves, masks, respirators, and eye goggles. This will help prevent you from being infected by the contamination, as well as help you keep the contamination from spreading to other rooms. It’s best to wear protective clothing even after the cleaning is done to prevent the contamination from falling onto other areas. And always clean up the contamination as soon as possible! Mold contamination spreads very quickly and very deep into the substrate, making it necessary to contain the contamination and keep it out of your home and in the air by getting rid of it as soon as it is spotted.